Gruss Forum • View topic

by **mellenec** » Sat Oct 13, 2007 3:26 pm

I'd like to set the value to 0, so that the next market is run just at the scheduled off of the current one,
but it seems not to be accepted.
Any ideas?

by **Captain Sensible** » Sat Oct 13, 2007 6:35 pm

THe clock seems to be in sync with your pc clock so you could push that forward 1 minute and set the timer to 1 minute

by **mellenec** » Sat Oct 13, 2007 8:30 pm

Captain Sensible wrote:THe clock seems to be in sync with your pc clock so you could push that forward 1 minute and set the timer to 1 minute

smart idea. I'll probably do that, but I wonder why BA couldn't do it.

by **GaryRussell** » Sun Oct 14, 2007 2:03 pm

0 will switch to the market at the scheduled off (assuming your PC's clock is set correctly) and always has worked that way. There must be some other problem you are experiencing. Do you get error messages or does nothing happen at all? Does it fail completely or does it work sometimes?

by **PeteB** » Fri Oct 19, 2007 5:53 pm

Hang on - I'm confused now... I'm only just starting to use auto-select, so may be being stupid...

My Excel sheet is for pre-event only, and I need to green up before the scheduled start time to ensure no risk of going in-play when not green.
At the scheduled off, I want to switch immediately to the next race - I don't want to wait for the actual off, or I lose valuable minutes.

Won't zero do the opposite, and switch to the next market when it starts - i.e. is suitbale for an in-lay spreadsheet?

I think it would be useful to have three options:
a) leave current market at: x minutes before current race (where zero means switch at start)
b) leave current market at: actual off of current race
c) switch to next market at: x minutes before next race (where zero means switch at start)

by **allgreen** » Fri Oct 19, 2007 11:51 pm

At the scheduled off, I want to switch immediately to the next race - I don't want to wait for the actual off, or I lose valuable minutes.

If you set up multiple sheets, e.g. one sheet for each meeting then this won't be such an issue?

by **PeteB** » Sat Oct 20, 2007 3:24 pm

Good point - so I use the 'wait until after off' option, and run maybe races 1,5,9 from one tab, and 2,6,10 from another, and so on??
That should work - thanks!

by **PeteB** » Mon Oct 29, 2007 7:09 pm

I like the new feature to enter -1 in the refresh rate cell to switch markets - exactly what i need - thanks Gary :-)

Auto select markets at specif. time

Auto select markets at specif. time

Who is online

Sports betting software from Gruss Software